-40%
Norgren 1/8

Norgren 1/8" Manual Pneumatic Valves Normally Closed S/666/51 Silver Pushbutton

$ 31.65

Availability: 100 in stock
  • Air Pilot Port Diameter: 1/8 in
  • Condition: New / old stock, some boxes are worn, best boxes will ship first. We found a couple of loose nameplates, so there is a possibility a few may need to be re-glued after shipment.
  • All returns accepted: Returns Accepted
  • Brand: Martonair / Norgren
  • Outlet Port Diameter: 1/8 in
  • SELLER LOCATION: USA
  • Item must be returned within: 30 Days
  • Operating temperature: -20C to +80C
  • Maximum pressure: 145 PSI / 10 BAR
  • Max flow rate: 197 Liters per minute
  • Body material: Die Cast Zinc Alloy
  • Air Pilot Type: Single Pilot (Spring Return)
  • Return shipping will be paid by: Buyer
  • Threads: 1/8" NPT
  • Suitable Media: Air
  • Number of Ways: 2-Way
  • Refund will be given as: Money Back
  • Seals: Nitrile
  • MPN: S/666/51/S
  • Exhaust Port Diameter: 1/8 in
  • Inlet Port Diameter: 1/8 in
  • Country/Region of Manufacture: United Kingdom

    Description

    3478B3F.46
    New Martonair (now Norgren) 1/8" NPT Manual Push Button, Poppet Type Pneumatic Valves, Normally Closed Operation, with Shrouded Silver Pushbutton and Mounting Nut, Part Number S/666/51/S (S/666/51/Silver).  Each bid quantity is for One (1) Valve.  You may bid / buy any number, up to the total quantity available above.
    These were purchased at an online liquidation recently, and they are new in the original factory boxes.  Some boxes are worn, best boxes will ship first.  We also found a couple of loose nameplates while we were inspecting them, so there is a possibility that a few may need to be re-glued after shipment.  Operation is Normally Closed.  That is to say, air flows through the valve only when the button is pushed.  Rugged shrouded button design helps prevent accidental operation.  For use with filtered air at pressures from 2 to 10 BAR (29 to 145 PSI); from either lubricated or non-lubricated systems.
    Pricey little gadgets when you buy them from a retail supplier.
    According to the calipers
    :
    Overall length:  3.129" / 79.49 MM
    Width:  1.322" / 33.59 MM
    Thickness:  .759" / 19.27 MM
    Mounting hole diameter:  1.141" / 29 MM
    Body material: Die Cast Zinc Alloy
    Seals: Nitrile
    Piston: Plastic